Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
- 11. Steering
   11.2. Shaft and casing of a steering column
   11.3. A power absorbing steering column
   11.4. Steering drive
   11.5. Pipeline of high pressure / return pipeline
   11.6. Adjustment of a free wheeling of a lath of a steering
   11.7. Maple belt
   + 11.8. System of hydrostrengthening of a steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment

11.6. Adjustment of a free wheeling of a lath of a steering

GENERAL INFORMATION

Elements of the toddler of a lath

1. Adjusting screw
2. Uplotnitepnoye a ring, always replace, it was not established on models to VIN 89 JA 413 627
3. Epiploon plug
4. Cover

For carrying out adjustment of a free wheeling of a lath 2 mechanics are necessary. Adjustment is carried out at the muffled engine, the car at carrying out adjustment should stand on the earth. Wheels should stand directly.

Adjusting screw

PERFORMANCE ORDER

1) turn a steering wheel here and there approximately on ^30о from the central situation and listen, whether publishes the reechny mechanism of a steering a scratch or knock
	2) thus the second mechanic should twist the adjusting screw (it is specified by an arrow) clockwise while the scratch and knock will not stop
3) carry out control driving and adjust a free wheeling of a lath once again if it is necessary

The system of hydrostrengthening of a steering is filled with hydraulic liquid, G 002 000 detail.