Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12.10. Back door (Compartment model)
   12.11. Forward door, bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing jams, a window regulator
   12.14. Door lock
   12.15. Draft of lever transfer of the lock
   12.16. Rope of the internal door lock
   12.17. Rotary clamp, adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. Central lock
   12.21. The pump with two modes of forcing
   12.22. Leading activator
   12.23. Activator of a back door
   12.24. Trunk lid activator
   12.25. Activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt slip (Compartment model)
   12.28. Framework of a back door, bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. Rope, sharnirny lever
   12.31. Door handle
   12.32. Holder of components of a door
   12.33. Hatch
   12.34. Bumper casing
   12.35. Sealing of a rear bumper
   12.36. An extending clamp
   12.37. Forward spoiler / laying of a niche of a wheel (Compartment model)
   12.38. Top overlay of a forward spoiler (Compartment model)
   12.39. Back spoiler / laying of a niche of a wheel
   12.40. Rear bumper (Compartment model)
   12.41. Window regulators
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


12. Body, salon

12.1. Body sizes

GENERAL INFORMATION

If other is not specified, all tolerances make ± 2.0 mm.

Sedan. Sizes of a floor of a forward part of a body



 

And = 1200 mm
B= 1143 mm
C= 952 ± 1,0 mm
D= 1555 mm
E= 721 ± 1,0 mm
F= 734 ± 3,0 mm
G= 452 ± 2,0 mm
H= 1050 ± 1,0 mm
I= 1022 ± 1,0 mm

Sedan. Sizes of a forward part of a body

 
N= 601 ± 1,0 mm
O= 927 ± 1,0 mm
P= 686 ± 1,0 mm

Sedan. Sizes of a forward part of a body

 
L= 1050 ± 1,0 mm
M= 1626 ± 2,0 mm

Sedan. Lateral sizes

 
J= 1090 ± 2,0 mm
K= 682 ± 1,0 mm

Sedan. Lateral sizes, sizes of a back part

 
Q= 1380 ± 1,0 mm
R= 1360 ± 2,0 mm
S= 1226 ± 1,0 mm
T= 470 ± 1,0 mm

The sizes of a body floor for all-wheel drive models

 
A' = 1200 mm
B' = 732 mm
C' = 450 mm
D' = 722 mm
E' = 1143 mm
F' = 734 mm
G' = 1031 mm
H' = 616 mm

The sizes of the lower part of a body for all-wheel drive models

 
B1 = 732 mm
C1 = 450 mm
D1 = 722 mm
G1 = 103 mm

The sizes of a forward part of a body for all-wheel drive models, and also the Compartment

 
A= 1022 ± 2,0 mm
B= 1626 ± 1,0 mm

The sizes of a forward part of a body for all-wheel drive models, and also the Compartment

 
C= 1050 ± 2,0 mm
D= 682 ± 1,0 mm

The sizes of the parties for all-wheel drive models, and also the Compartment

 
E= 1385 ± 1,0 mm
F= 1110 ± 1,0 mm

The sizes of a back part of a body for all-wheel drive models, and also the Compartment
 
G= 1066 ± 1,0 mm
H= 1255 ± 2,0 mm

The sizes of a floor of a back part of a body for all-wheel drive models, and also the Compartment
 
I= 722 ± 2,0 mm
J= 450 ± 1,0 mm
K= 732 ± 2,0 mm