Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12.10. Back door (Compartment model)
   12.11. Forward door, bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing jams, a window regulator
   12.14. Door lock
   12.15. Draft of lever transfer of the lock
   12.16. Rope of the internal door lock
   12.17. Rotary clamp, adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. Central lock
   12.21. The pump with two modes of forcing
   12.22. Leading activator
   12.23. Activator of a back door
   12.24. Trunk lid activator
   12.25. Activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt slip (Compartment model)
   12.28. Framework of a back door, bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. Rope, sharnirny lever
   12.31. Door handle
   12.32. Holder of components of a door
   12.33. Hatch
   12.34. Bumper casing
   12.35. Sealing of a rear bumper
   12.36. An extending clamp
   12.37. Forward spoiler / laying of a niche of a wheel (Compartment model)
   12.38. Top overlay of a forward spoiler (Compartment model)
   12.39. Back spoiler / laying of a niche of a wheel
   12.40. Rear bumper (Compartment model)
   12.41. Window regulators
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


12.15. Draft of lever transfer of the lock

GENERAL INFORMATION

Draft of lever transfer of the lock


Removal

PERFORMANCE ORDER
1) place the plug in draft of lever transfer 2
2) insert draft 3 into the lever
3) establish an assembly clamp 4 in disconnecting lever of the door lock
4) check a free wheeling of draft of lever transfer in a clamp 4, without rendering pressure upon the disconnecting lever of the door lock;
the most admissible люфт – 1.0 mm

Installation

Installation carry out upside-down.

To carry out adjustment move the coupling up to a working clamp 4.

Draft of lever transfer of the lock (Compartment model)

Removal

PERFORMANCE ORDER
1) establish the plug in the lever 2
2) hook on draft of lever transfer 3 on the lever
3) insert a fixing clamp 4 into disconnecting lever of the door lock
4) check a free wheeling of a clamp 4, without rendering pressure upon the disconnecting lever of the door lock; maximum free wheeling of 1.0 mm

Draft of lever transfer of the lock, installation

Installation carry out upside-down, in view of the following:

to carry out adjustment move the coupling up to a working clamp 4.