The device, service, Audi 80/90/Coupe 1986-1991 repair - 12.33. Hatch//Audi / songwizard.ru

Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12.10. Back door (Compartment model)
   12.11. Forward door, bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing jams, a window regulator
   12.14. Door lock
   12.15. Draft of lever transfer of the lock
   12.16. Rope of the internal door lock
   12.17. Rotary clamp, adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. Central lock
   12.21. The pump with two modes of forcing
   12.22. Leading activator
   12.23. Activator of a back door
   12.24. Trunk lid activator
   12.25. Activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt slip (Compartment model)
   12.28. Framework of a back door, bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. Rope, sharnirny lever
   12.31. Door handle
   12.32. Holder of components of a door
   12.33. Hatch
   12.34. Bumper casing
   12.35. Sealing of a rear bumper
   12.36. An extending clamp
   12.37. Forward spoiler / laying of a niche of a wheel (Compartment model)
   12.38. Top overlay of a forward spoiler (Compartment model)
   12.39. Back spoiler / laying of a niche of a wheel
   12.40. Rear bumper (Compartment model)
   12.41. Window regulators
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. Central air
+ 14. Electric equipment


dfe5d7b3



12.33. Hatch

GENERAL INFORMATION

Hatch

1. Hatch cover
2. Condensing laying of a cover of the hatch
3. Bolt of a cover of the hatch
4. Bolt of adjustment of height, forward
5. Screw of adjustment of height, back
6. Loop of a cover of the hatch
7. A screw with a flat head
8. Fairing
9. Sound-proof laying
10. Lateral directing a rail
11. Restrictive arm

12. The screw with a spherical head
13. A screw with a flat head
14. Rain deflector
15. Back directing (with a rope)
16. Inclined arm
17. Lift / holder of the hatch
18. Forward support of the hatch
19. Covering of a cover of the hatch
20. Lock clip of a covering of a cover of the hatch

The hatch cover, making elements

1. Sealing laying of a cover of the hatch
2. Furnish detail
3. Rastyadzheniye spring
4. Loop of a cover of the hatch
5. Rubber elastic laying

6. Lamellar spring
7. Protective felt laying
8. Protective felt laying
9. Rubber limiter
10. A tape (holds on a place a spring)

Making elements of the hatch (Compartment model)

1. Connecting draft
2. Polzun (2x)
3. Back trench of a drainage system
before removal of a trench of a drainage system remove directing with the elevating channel
4. Rope
5. Back directing with a rope
6. Directing with the elevating channel
7. Lateral cover
for removal weaken lock bolts
and with force shift a lateral cover
opposite to condensing laying
hatch covers, and then tighten bolts
8. Hollow rivet

9. A directing trench
it is fixed by means of rivets
for removal симимте a framework also drill rivets
10. Secret screws (7x)
11. Cover of the directing
12. Reflector
disconnect the elevating lever before removal
13. Secret screw
14. Hollow rivet
15. Hollow rivet
16. Nut
17 Directing tubes of a rope
for removal ывсверлите rivets
18. A bolt with a washer (3x)