The device, service, Audi 80/90/Coupe 1986-1991 repair - 12.4. Forward guard//Audi / songwizard.ru

Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12.10. Back door (Compartment model)
   12.11. Forward door, bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing jams, a window regulator
   12.14. Door lock
   12.15. Draft of lever transfer of the lock
   12.16. Rope of the internal door lock
   12.17. Rotary clamp, adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. Central lock
   12.21. The pump with two modes of forcing
   12.22. Leading activator
   12.23. Activator of a back door
   12.24. Trunk lid activator
   12.25. Activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt slip (Compartment model)
   12.28. Framework of a back door, bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. Rope, sharnirny lever
   12.31. Door handle
   12.32. Holder of components of a door
   12.33. Hatch
   12.34. Bumper casing
   12.35. Sealing of a rear bumper
   12.36. An extending clamp
   12.37. Forward spoiler / laying of a niche of a wheel (Compartment model)
   12.38. Top overlay of a forward spoiler (Compartment model)
   12.39. Back spoiler / laying of a niche of a wheel
   12.40. Rear bumper (Compartment model)
   12.41. Window regulators
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. Central air
+ 14. Electric equipment


dfe5d7b3



12.4. Forward guard

GENERAL INFORMATION

Forward guard (Sedan models)

1. A bolt with a six-sided head, 23 N of m.
2. The self-cutting screw, 7.5 N of m.
3. Guard, bottom section
it is possible to remove together with the central section
4. The self-cutting screw, 7.5 N of m.
5. A bolt with a six-sided head, 23 N of m.
6. A bearing plate of the lock
it is possible to remove together with the central or bottom section
7. Metal ear
at removal of a guard pull it directly down for a corner
8. The self-cutting screw, 7.5 N of m.
9. Guard, central section

Forward guard in collecting (Compartment model)
1. A bolt with a six-sided head, 23 N of m.
2. The self-cutting screw with a washer
3. Guard, central section
4. Guard, bottom section
5. The self-cutting screw with a washer

Removal

PERFORMANCE ORDER
1) remove a bumper
2) remove a front grille
3) unscrew the decorative panel (arrows)
4) pull out a guard from a condensing ring to the right or to the left

Removal for the Sedan model

PERFORMANCE ORDER
1) through an opening for access remove the holder of a rope and disconnect a rope
2) unscrew screws of a casing of stitched air (arrow)
3) to remove a guard, pull it down under a wing

Removal for Compartment model

PERFORMANCE ORDER
1) remove a bumper
2) remove a front grille
3) disconnect a cowl rope
4) unscrew screws of a decorative covering (arrow) and pull out it from a condensing ring
5) unscrew an air line of cooling air and an arm of a radiator (arrow)
6) unscrew an arm of an oil radiator
7) disconnect the switch of a lamp of motor office
8) disconnect a connecting loop on the guard panel
9) unscrew directing device of soaked-up air (arrow)

Installation

Installation carry out upside-down.