The device, service, Audi 80/90/Coupe 1986-1991 repair - 12.42. Internal furnish of a body//Audi / songwizard.ru

Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12.10. Back door (Compartment model)
   12.11. Forward door, bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing jams, a window regulator
   12.14. Door lock
   12.15. Draft of lever transfer of the lock
   12.16. Rope of the internal door lock
   12.17. Rotary clamp, adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. Central lock
   12.21. The pump with two modes of forcing
   12.22. Leading activator
   12.23. Activator of a back door
   12.24. Trunk lid activator
   12.25. Activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt slip (Compartment model)
   12.28. Framework of a back door, bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. Rope, sharnirny lever
   12.31. Door handle
   12.32. Holder of components of a door
   12.33. Hatch
   12.34. Bumper casing
   12.35. Sealing of a rear bumper
   12.36. An extending clamp
   12.37. Forward spoiler / laying of a niche of a wheel (Compartment model)
   12.38. Top overlay of a forward spoiler (Compartment model)
   12.39. Back spoiler / laying of a niche of a wheel
   12.40. Rear bumper (Compartment model)
   12.41. Window regulators
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. Central air
+ 14. Electric equipment


dfe5d7b3



12.42. Internal furnish of a body

GENERAL INFORMATION

Furnish of a forward door, it making parts

1. Crosswise screws, 1.5 N of m.
2. Connection panels (back)
weaken and take out from a frame
3. The control unit in an armrest
4. Crosswise screws, 2.5 N of m.
fix an armrest to the panel of internal furnish of a door
5. Armrest (lower part)
the shponka is inserted into a cut in the top part
6. Crosswise screw, 1.5 N of m.
7. Laying
8. Panel of internal furnish of a door
9. Insulating material
it is attached to the furnish panel by means of clips
10. Laying for fixing brackets of the panel of internal furnish
fix by means of gluing substance

11. Furnish detail
it is not required to remove it together спанелью internal furnish
12. Height adjustment
13. Connection panels (forward)
weaken and take out from a frame
14. Internal mechanism of opening of a door
press in the direction specified by an arrow and get from the door panel having removed draft
15. Blocking button
removal
turn approximately on 120 ° to the left and extend
installation
insert (the blocking button should be on 16 mm above a directing ring) turn on 120 ° to the right


Furnish of a back door, its components of a part

1. Connection panels (back)
weaken and take out from a frame
2. Crosswise screws, 1.5 N of m.
3. Armrest (the top part)
4. Screws with a six-sided head, 2.5 N of m.
5. Armrest (lower part)
the shponka is inserted into a cut in the top part
6. Crosswise screw, 1.5 N of m.
7. Laying
8. Panel of internal furnish of a door
9. Laying for fixing brackets of the panel of internal furnish
fix by means of gluing substance
10. Height regulator
11. Connection panels (predny)
weaken and take out from a frame

12. Blocking button
to remove the button it is not obligatory to assort it
removal
turn approximately on 120 ° to the left and extend
installation
insert (the blocking button should be on 16 mm above a directing ring) turn on 120 ° to the right
13. Internal mechanism of opening of a door
press in the direction specified by an arrow and get from the door panel having removed the lever a pusher

Components of furnish of a forward door (Compartment model)

1. Lock washer
2. Isolation
it is attached to the panel of internal furnish
by means of clips
do not use a washer anew if it is damaged
3. Lock washer
4. Panel of internal furnish of a door
it is attached to a door by means of clips
7. Armrest arm
it is fixed by means of the screw, 2,5 N of m.
8. Armrest
9. The being self-cut screw with an internal shestigrannik, 2,5 N of m, an internal side
4,0 mm.
10. Crosswise screw, 2.5 N of m.
11. Control panel

12. Panel of internal furnish of a door
to remove the finishing panel, pull it up
13. The internal mechanism opening a door
press forward and get from the finishing panel of a door
disconnect from the pusher lever
14. Directing the blocking button
15. Blocking button
removal
turn on 180 ° and get from the finishing panel
to remove the blocking button, it is not obligatory for assorting
16. Height regulator