The device, service, Audi 80/90/Coupe 1986-1991 repair - 12.43. Sitting//Audi / songwizard.ru

Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12.10. Back door (Compartment model)
   12.11. Forward door, bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing jams, a window regulator
   12.14. Door lock
   12.15. Draft of lever transfer of the lock
   12.16. Rope of the internal door lock
   12.17. Rotary clamp, adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. Central lock
   12.21. The pump with two modes of forcing
   12.22. Leading activator
   12.23. Activator of a back door
   12.24. Trunk lid activator
   12.25. Activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt slip (Compartment model)
   12.28. Framework of a back door, bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. Rope, sharnirny lever
   12.31. Door handle
   12.32. Holder of components of a door
   12.33. Hatch
   12.34. Bumper casing
   12.35. Sealing of a rear bumper
   12.36. An extending clamp
   12.37. Forward spoiler / laying of a niche of a wheel (Compartment model)
   12.38. Top overlay of a forward spoiler (Compartment model)
   12.39. Back spoiler / laying of a niche of a wheel
   12.40. Rear bumper (Compartment model)
   12.41. Window regulators
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. Central air
+ 14. Electric equipment


dfe5d7b3



12.43. Sitting

GENERAL INFORMATION

The plait of wires and the block of switches represent one whole, indissoluble chain and consequently they cannot be removed separately.

Sitting components with the electric drive (Compartment model)

1. Left power shaft
it is intended for sitting shift
forward and back
2. Sensor
is responsible for sitting shift forward and back
it is established only on driver's sitting
3. Lock-nut
4. A condensing rubber ring
5. Servomotor
it is intended for sitting shift
forward and back
6. A fixing clip
7. Right power shaft
it is intended for sitting shift
forward and back
8. The transferring mechanism
9. Servomotor
it is intended for adjustment of height of a forward part of sitting
10. Sensor
it is intended for adjustment of height of a forward part of sitting
it is established only on driver's sitting
11. A power shaft of the transferring mechanism
it is intended for adjustment of height of a forward part of sitting
12. The transferring mechanism
it is intended for adjustment of height of a forward part of sitting
13. A fixing bolt of the transferring mechanism
14. Control unit socket
for finding of the location
the socket use the suitable scheme of electroconducting
15. Lock-nut
16. Control unit
17. Fork of the socket of a plait of wires
for sitting with the electric drive equipped with a memory

18. Lock ring
19. Laying
20. Right adjusting core
it is intended for sitting shift forward and back
21. Back limiter of movement
22. Fixing bolts of a servomotor
23. Rivets
are intended for fixing of an arm of a spindle
24. Forward limiter of movement
25. Plugs
26. Spindle arm
removal, grind off and take rivets
installation, fix by means of rivets or M bolts – 5
27. A directing rail
28. The block of switches with a plait of wires
29. The right transferring mechanism
it is intended for sitting shift forward and back
30. A sitting frame with directing rails
31. Fixing bolts of transferring mechanisms
32. The back transferring mechanism
adjustment of height of sitting
33. Sensor
adjustment of height of a back part of sitting
it is established only on driver's sitting
34. Fixing bolts
are intended for fixing of the back servomotor regulating height of sitting
35. Fastenings of the relay of giving of tension
36. Relay of giving of tension

Components of backs of seats with the electric drive (Compartment model)
1. Framework of a back of sitting
2. Fixing bolt of the lateral finishing panel of sitting
it is established in a lock pin of a back of sitting
3. Cap
get
4. Lateral finishing panel of sitting
5. Block of switches
6. Fixing latches of the block of switches
represents a part of the lateral finishing panel
for removal of the block of switches hook latches a screw-driver
7. Clip
before removing the lateral finishing panel hook a clip a screw-driver

8. Sensor
it is intended for adjustment of provision of a sinka of sitting
9. Socket fork
for definition of a site of the socket use the suitable scheme of electroconducting
10. Fixing bolt
11. Servomotor
it is intended for adjustment of provision of a back
12. Fixing bolt
13. Lock arm
it is intended for servomotor fixing