Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
- 13. Central air
   13.2. Pressure switches
   13.3. Valve of descent of water
   13.4. Wedge-shaped belt of the compressor of the conditioner
   13.5. Check of vacuum system
   13.6. Places of connections of lines of a coolant, throttle
   13.7. Conditioner compressor
   13.8. Coupling of the compressor of the conditioner
+ 14. Electric equipment





13.8. Coupling of the compressor of the conditioner

GENERAL INFORMATION

Coupling of the compressor of the conditioner

1. Shponka
2. Lock ring
3. Coupling pulley
4. Adjusting laying
act in film and established for gap adjustment
between a pulley of the coupling and the compressor coupling
the size of a gap should be in limits
 0,6 1,0 mm
5. Spring washer
6. Nut of 20 N of m.
7. Compressor coupling
8. Lock ring
9. Magnetic coil
10. Conditioner compressor

PERFORMANCE ORDER
1) block the compressor coupling the special tool, and then weaken and braid a nut; inhaling moment: 20 N of m.
2) remove the compressor coupling
3) establish the magnetic coil only with the safety diode (it is specified by an arrow)

Prevention

Repair of all specified details can be carried out, without lowering system of cooling of the conditioner.