Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
- 1.2. Car identification
   1. Maintenance instruction
   1.3. Arrangement of identification plates
   1.4. Dashboard
   - 1.5. Car service
      1.5.2. Seasonal change such as fuel
      1.5.3. Petrol additives
      1.5.4. The latest news in the field of fuel
      1.5.5. Cowl
      1.5.6. Engine compartment
      - 1.5.7. Engine oil
         1.5.7.1. Identification of engine oil
         1.5.7.2. Consumption of engine oil
         1.5.7.3. Check of level of oil in the engine
         1.5.7.4. Oil addition in the engine
         1.5.7.5. Replacement of engine oil
      1.5.8. Oil filter of the engine
      + 1.5.9. AKPP liquid
      1.5.10. MKPP oil
      1.5.11. Air filter
      1.5.12. Spark plugs
      + 1.5.13. Hydraulic booster of a steering and amplifier of brake system
      + 1.5.14. Brake liquid
      + 1.5.15. Cooling system
      + 1.5.16. Tanks for washers of a windscreen and headlights of forward light
      1.5.17. Razbryzgivateli
      1.5.18. Brushes of screen wipers
      + 1.5.19. Tires / wheels
   + 1.6. Independent service of the car
   + 1.7. Specifications
   1.8. Capacities
   1.9. Sizes
   1.10. Loadings
   1.11. Schedule preventive car servicings / greasings
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


1.5.7.3. Check of level of oil in the engine

GENERAL INFORMATION

Audi-80/Audi-80 Quattro, Audi-90/Audi-90 Quattro


Audi-90 Quattro 20V, Aуди of the Compartment of Quattro

It is best of all to check oil level when the engine is heated-up.

Muffle the engine.

For receiving exact measurements the car should stand on an equal surface. After a stop of the engine wait some minutes that oil gathered in the oil pallet.

Pull out щуп for measurement of level of oil and wipe it dry by means of a rag.

Insert щуп: insert it up to the end that measurement was exact.

Again pull out щуп. Oil level in norm if it is between "Max" and "Min" marks on щупе.

If level of oil is lower than a mark of "Min" or is not designated absolutely, immediately add oils.

After definition of level of oil insert щуп up to the end into an opening.