Audi 80/90/Coupe
- 1.2. Car identification
1. Maintenance instruction
1.3. Arrangement of identification plates
1.4. Dashboard
+ 1.5. Car service
- 1.6. Independent service of the car
1.6.2. Small-sized spare wheel
1.6.3. Wheel replacement
+ 1.6.4. Safety locks
- 1.6.5. Replacement of bulbs
1.6.5.1. Headlights of forward light
1.6.5.2. Forward indexes of turns and marker lights
1.6.5.3. A back block headlight on a back wing
1.6.5.4. The central stoplight on back glass
1.6.5.5. Back fog lights and headlights of a tail light in a trunk lid
1.6.5.6. Bulbs of illumination of registration plate
1.6.5.7. Back lateral dimensional lamp
1.6.5.8. Plafond of illumination of salon
1.6.5.9. Bulbs for reading cards
1.6.5.10. Fog lights
1.6.5.11. Lamp of illumination of an impellent compartment
1.6.5.12. Lamp of illumination of a luggage carrier
1.6.6. Car audio replacement
1.6.7. Car lifting
1.6.8. General rules of towage
+ 1.7. Specifications
1.8. Capacities
1.9. Sizes
1.10. Loadings
1.11. Schedule preventive car servicings / greasings
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment
1.6.5.10. Fog lights
| GENERAL INFORMATION |
| Remove a lattice of an airintaking opening having pulled it on itself. Unscrew screws (And) with heads under a crosswise screw-driver and pull out a headlight. Disconnect the connection socket. |
Turn off both screws with heads under the crosswise screw-driver, fixing a back cover. Uncover.
Disconnect a clip, fixing a bulb. Get a bulb and disconnect wires of connection of a bulb.
Establish a new bulb and twirl a back cover. Installation of a headlight is into place made upside-down removals.
Check adjustment of height of a beam of fog lights.
For adjustment, turn the screw (In) clockwise to lower a beam; and counter-clockwise to lift a beam.