Audi 80/90/Coupe
- 1.2. Car identification
1. Maintenance instruction
1.3. Arrangement of identification plates
1.4. Dashboard
+ 1.5. Car service
- 1.6. Independent service of the car
1.6.2. Small-sized spare wheel
1.6.3. Wheel replacement
+ 1.6.4. Safety locks
- 1.6.5. Replacement of bulbs
1.6.5.1. Headlights of forward light
1.6.5.2. Forward indexes of turns and marker lights
1.6.5.3. A back block headlight on a back wing
1.6.5.4. The central stoplight on back glass
1.6.5.5. Back fog lights and headlights of a tail light in a trunk lid
1.6.5.6. Bulbs of illumination of registration plate
1.6.5.7. Back lateral dimensional lamp
1.6.5.8. Plafond of illumination of salon
1.6.5.9. Bulbs for reading cards
1.6.5.10. Fog lights
1.6.5.11. Lamp of illumination of an impellent compartment
1.6.5.12. Lamp of illumination of a luggage carrier
1.6.6. Car audio replacement
1.6.7. Car lifting
1.6.8. General rules of towage
+ 1.7. Specifications
1.8. Capacities
1.9. Sizes
1.10. Loadings
1.11. Schedule preventive car servicings / greasings
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment
1.6.5.5. Back fog lights and headlights of a tail light in a trunk lid
| GENERAL INFORMATION |
Open a trunk lid.
Unscrew screws with a head under a crosswise screw-driver.
Remove a headlight casing by means of a flat edge of a screw-driver.
Accurately press a bulb into a cartridge, turn it counter-clockwise and get.
Establish a new bulb.
Audi-80/Audi-80 Quattro, Audi-90/Audi-90 Quattro
|
1–bulb of a back fog light 2–bulb of a headlight of a tail light |
Insert a cartridge with a bulb on a place and turn it clockwise against the stop.
Establish into place a casing and fix it by means of the screw with a head under a crosswise screw-driver.