Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
- 1.2. Car identification
   1. Maintenance instruction
   1.3. Arrangement of identification plates
   1.4. Dashboard
   + 1.5. Car service
   - 1.6. Independent service of the car
      1.6.2. Small-sized spare wheel
      1.6.3. Wheel replacement
      + 1.6.4. Safety locks
      - 1.6.5. Replacement of bulbs
         1.6.5.1. Headlights of forward light
         1.6.5.2. Forward indexes of turns and marker lights
         1.6.5.3. A back block headlight on a back wing
         1.6.5.4. The central stoplight on back glass
         1.6.5.5. Back fog lights and headlights of a tail light in a trunk lid
         1.6.5.6. Bulbs of illumination of registration plate
         1.6.5.7. Back lateral dimensional lamp
         1.6.5.8. Plafond of illumination of salon
         1.6.5.9. Bulbs for reading cards
         1.6.5.10. Fog lights
         1.6.5.11. Lamp of illumination of an impellent compartment
         1.6.5.12. Lamp of illumination of a luggage carrier
      1.6.6. Car audio replacement
      1.6.7. Car lifting
      1.6.8. General rules of towage
   + 1.7. Specifications
   1.8. Capacities
   1.9. Sizes
   1.10. Loadings
   1.11. Schedule preventive car servicings / greasings
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


1.6.5.8. Plafond of illumination of salon

GENERAL INFORMATION

Aуди models of 1986-1989

By means of a flat edge of a screw-driver press on a clip (it is specified by an arrow) in the switch direction.

For cars with the opening top hatch accurately insert a flat edge of a screw-driver between the right edge of a frame and the furnish panel. Squeeze out a frame.

Remove a lamp frame from the furnish panel.

Remove a bulb.

Insert a new bulb.

Establish a frame of a lamp having inserted at first the party with the switch, and then press on the second region so that spring clips became isolated.

Audi1990-1992 models of years

Accurately insert a flat edge of a screw-driver between the right edge of a frame and the furnish panel (it is specified by an arrow). Squeeze out a frame.

For cars with the opening top hatch, insert a screw-driver edge on the left side of a frame.

Remove a lamp frame from the furnish panel.

Remove a bulb.

Insert a new bulb.

Establish a frame of a lamp having inserted at first the party with the switch, and then press on the second region so that spring clips became isolated.