Audi 80/90/Coupe
- 1.2. Car identification
1. Maintenance instruction
1.3. Arrangement of identification plates
1.4. Dashboard
+ 1.5. Car service
+ 1.6. Independent service of the car
- 1.7. Specifications
1.7.2. Audi-90 Quattro, Quattro 20V Audi-90/models
1.8. Capacities
1.9. Sizes
1.10. Loadings
1.11. Schedule preventive car servicings / greasings
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment
1.7. Specifications
1.7.1. Quattro Audi-80 Audi-80/models
| GENERAL INFORMATION |
Data on engines / spark plugs
| Engine |
Audi-80/Audi-80 Quattro
| |||||
| Number of cylinders |
4
|
5
| ||||
| Working volume, cm3 |
1595
|
1781
|
1984
|
1994
|
2226
|
2309
|
| Spark plugs | ||||||
| Bosch |
W 7 DTC
|
W 7 DTC
| ||||
| Beru |
14-7 DTU
|
14-7 DTU
| ||||
| Champion |
N 7 BYC
|
N 7 BYC
| ||||
| Interelectrode gap |
0.7-0.9 mm
|
0.7-0.9 mm
| ||||
At carrying out scheduled preventive maintenance at the dealer of Aуди firm replacement of spark plugs is carried out. If you want to replace candles between scheduled preventive maintenance, it is necessary to remember the following:
– the engine, spark plugs and system of ignition are adjusted for collaboration. In order that the engine continued to work regularly and was not damaged, use only firm spark plugs recommended by Aуди firm. Also it is very important to pay attention to number of electrodes and heating temperature;
– as on models of one year of release in view of the technical reasons spark plugs with various characteristics can be established, we recommend, that you got spark plugs at the dealer of Aуди firm who possesses the most last information.
Maple belts
|
4-cylinder engine
|
5-cylinder engine
| |
|
for the generator
|
–
|
11.2 x 866
|
|
for the generator and water насоса1)
|
9.5 x 950
|
–
|
|
for the conditioner compressor
|
12.5 x 795
|
12.5 x 915
|
|
for the pump of the hydraulic booster of a steering
|
9.5 x 850
|
12.5 x 992
|
1) this belt is absolutely necessary for operation of the engine. Therefore it is recommended, that you always had a spare maple belt in the car for fast replacement.
Maple belts test the greatest loading at car operation. Therefore they should be of very high quality.
At belt replacement, it is impossible to use any belt of the same size simply. For ensuring safe operation of the engine, use only firm maple belts of Aуди firm developed specially for your car.