Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   - 5.2. Systems of injection of fuel
      5.2.1.2. Specifications (4-cylinder models)
      5.2.1.3. Components of system of injection for 5-cylinder models
      5.2.1.4. Specifications (5-cylinder models)
      5.2.1.5. Starting position of a plate of the sensor of an air stream
      5.2.1.6. Free wheeling of a plate of the sensor of an air stream
      5.2.1.7. Lever of a plate of the sensor of an air stream
      5.2.1.8. An operating plunzher
      5.2.1.9. Throttle valve
      5.2.1.10. Rope of management of a butterfly valve
   5.2.2. Fuel injectors (20-klapanny models)
   + 5.2.3. Electronic control system of the MPI engine
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


5.2.1.7. Lever of a plate of the sensor of an air stream

GENERAL INFORMATION

Always carry out the main adjustment of the lever at replacement of the distributor of fuel or a plate of the sensor of an air stream.

Main adjustment

PERFORMANCE ORDER
1) check distance between contact surfaces for the fuel distributor on a plate of the sensor of an air stream and a roller for the lever of a plate of the sensor, if necessary adjust by means of the screw of adjustment of a mix

18.8 mm of ± 0.1 mm

2) this size loses the value after contents adjustment WITH (an operating current) to the specified values