Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
- 7. Ignition system
   7.1.2. Specifications (4-cylinder models)
   7.1.3. Components of system of ignition for 5-cylinder models
   7.1.4. Specifications (5-cylinder models)
   7.1.5. CIS-E Motronic control unit (the alarm block)
   7.1.6. Distributor rotor
   7.1.7. Ignition distributor (4-cylinder models)
   7.1.8. Ignition distributor (5-cylinder models)
   7.1.9. Components of system of ignition for 20-klapanny models
   7.1.10. Specifications (20-klapanny models)
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


7.1.2. Specifications (4-cylinder models)

GENERAL INFORMATION

Prevention

The number of turns of idling, installation of a corner of an advancing of ignition and the contents WITH are interconnected and should be checked and be regulated together.


System type toplivopodachi/ignitions
CIS-E Motronic
CIS-E Motronic (the combined system toplivopodachi/ignitions)
893 907 404
Ignition distributor
053 905 205А
Restriction of number of rpm (the top limit) (via the CIS-E Motronic control unit)
6400 ± 100 rpm
Installation of a corner of an advancing of ignition:
 – verifying value
4 ° – 8 ° before the top dead point
 – adjusting value
6 ± 1 ° before the top dead point
Operating procedure of cylinders
1–3–4–2
Spark plugs
  – Bosch
W7DTC
 – interelectrode gap
0.8 ± 0.1 mm
 – inhaling moment
20 N of m.
Number of turns of idling (is not regulated, copes system of stabilization of idling)
840 ± 60 rpm
The contents WITH (in a tube for measurement WITH, the oxygen sensor is connected)
0.3-1.2 about. the % adjustment is carried out by means of the current control of a regulator of pressure difference)