The device, service, Audi 80/90/Coupe 1986-1991 repair - 7.1.8. Ignition distributor (5-cylinder models)//Audi / songwizard.ru

Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
- 7. Ignition system
   7.1.2. Specifications (4-cylinder models)
   7.1.3. Components of system of ignition for 5-cylinder models
   7.1.4. Specifications (5-cylinder models)
   7.1.5. CIS-E Motronic control unit (the alarm block)
   7.1.6. Distributor rotor
   7.1.7. Ignition distributor (4-cylinder models)
   7.1.8. Ignition distributor (5-cylinder models)
   7.1.9. Components of system of ignition for 20-klapanny models
   7.1.10. Specifications (20-klapanny models)
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment


dfe5d7b3



7.1.8. Ignition distributor (5-cylinder models)

Installation

PERFORMANCE ORDER
1) And – at the established engine – establish a flywheel in the top dead point – the cylinder 1 (it is specified by an arrow)
In – at the removed engine – establish a label on a vibrogasitel (pulley) opposite to a label on a belt cover (it is specified by an arrow)
2) level a label on a cam-shaft asterisk with a cover of a head of cylinders (it is specified by an arrow)
3) establish the distributor so that the rotor was directed on a label for the cylinder 1 on a distributor casing (it is specified by an arrow)
4) clear a distributor cover before installation
5) check it about cracks and soot traces as result of an iskreniye, if necessary replace
6) adjust a corner of an advancing of ignition

Prevention

The number of turns of idling, installation of a corner of an advancing of ignition and the contents WITH are interconnected and should be checked and be regulated together.