Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press coupling disk
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   - 8.3. Mechanical transmission 01А
      8.3.2. Removal and transmission installation
      8.3.3. Dismantling and transmission assembly
      - 8.3.4. Differential
         8.3.4.2. Differential mechanisms
         8.3.4.3. Removal and differential installation
         8.3.4.4. Dismantling and differential assembly
      8.3.5. Driveshaft
      8.3.6. Central kardanny hinge
   + 8.4. Automatic transmission 089
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


8.3.4. Differential

8.3.4.1. Technical characteristics

GENERAL INFORMATION

 Code
AEX
AEC
ARS
Years of release: from
06/86
06/86
Design: Model
Audi-80 Quattro
Audi-90/of the Compartment of Quattro
Engine
in volume 2.0 liters
in volume 2.3 liters
Transmission
ACT
AKU/AXL or ASZ/AXM
Transfer number: differential
41:9= 4.556
37:9= 4.111
Greasing volume
0.75 liter
Specification
Transmission GL 50 oil (MIL-L 2105 B) SAE 90
Coupling drive
the hydraulic
Diameter of a disk of the coupling of coupling
210 mm
228 mm
Diameter of a flange of a leading shaft
90 mm
100 mm
90 mm