Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press coupling disk
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   + 8.3. Mechanical transmission 01А
   - 8.4. Automatic transmission 089
      8.4.2. Lever and rope of the lever of gear shifting
      8.4.3. Lock of automatic gear shifting
      8.4.4. Mechanism of management of a butterfly valve
      8.4.5. Removal and transmission installation
      8.4.6. Check of the moments of gear shifting
      8.4.7. Main transfer
      8.4.8. Differential
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment

8.4.7. Main transfer

GENERAL INFORMATION

Transmission 089/main transfer

1. Hydrotransformer
2. Case of the main transfer
3. Hydrotransformer epiploon
4. 30 N of m.
5. Regulator
6. Turbine shaft
it is possible to remove and establish only after separation of a transmission and main transfers
7. Pump shaft
completely insert into the pump before hydrotransformer installation

8. An epiploon, always replace
9. Washer
10. Laying
always replace
11. A feeding tube / щуп for measurement of level of cooling liquid
12. Transmission
13. Epiploon
always replace
14. Bolt of connection of Bandzho type of 40 N of m.
15. A radiator of cooling liquid line 5-рядный