Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
- 9. Suspension brackets, wheels
   9.1.1. Elimination of resonance / vibration of a cross-piece (4-cylinder models)
   9.1.2. Change of a design of a forward suspension bracket
   9.1.3. Semi-axis
   9.1.4. Suspension bracket rack
   9.1.5. CV JOINTS
   9.1.6. Suspension bracket rack (all-wheel drive models)
   9.1.7. CV JOINTS (all-wheel drive models)
   + 9.2. Back suspension bracket
   + 9.3. Wheels and tires
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment







dfe5d7b3


9.1.2. Change of a design of a forward suspension bracket

GENERAL INFORMATION

Change of a design of a forward suspension bracket of the models which are let out since 1990

1. Rack of the bearing of a nave of a wheel and shock-absorber
with a uvula for fastening of connecting draft of the stabilizer of cross-section stability
the modified shock-absorbers are established
2. 45. N of m.
3. Connecting draft
4. 45 N of m.
always replace
5. Lever of a forward suspension bracket
it is modified for the purpose of removal of fastening of connecting draft
6. Cross-piece of a forward suspension bracket

7. Stabilizer of cross-section stability
it is modified
8. Rubber plug
there are plugs of various diameters depending on diameter of the stabilizer
9. Clip
it is modified
10. 35 N of m.
always replace
twist, only when the car costs on the earth


Prevention

It is impossible to establish the modified elements of a suspension bracket on cars of old models.


Change of a design of a forward suspension bracket of the models which are let out since 1990

1. Plug
2. Suspension bracket lever
levers of a suspension bracket differ for the left and right parties
3. Bolt
establish in the suspension bracket lever against the stop

4. Spherical hinge
spherical hinges differ for the left and right parties
trailer diameter = 19.0 mm
do not expand a nest in a rack of the bearing of a nave of a wheel at removal / installation
adjust disorder of forward wheels after installation
5. Washer
6. 65 N of m.

Prevention

It is impossible to establish the modified elements of a suspension bracket on cars of old models.