Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
+ 8. Transmission
- 9. Suspension brackets, wheels
9.1.1. Elimination of resonance / vibration of a cross-piece (4-cylinder models)
9.1.2. Change of a design of a forward suspension bracket
9.1.3. Semi-axis
9.1.4. Suspension bracket rack
9.1.5. CV JOINTS
9.1.6. Suspension bracket rack (all-wheel drive models)
9.1.7. CV JOINTS (all-wheel drive models)
- 9.2. Back suspension bracket
9.2.1. Oil cap
9.2.2. Bearings of a nave of a wheel
9.2.3. Removal and installation of the back bridge
9.2.4. Suspension bracket rack
9.2.5. Change of a design of a back suspension bracket
+ 9.3. Wheels and tires
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment
9.2.5. Change of a design of a back suspension bracket
| GENERAL INFORMATION |
Prevention
Change of a design of a back suspension bracket of the models which are let out since 1990 – for all-wheel drive models
|
1. A rack of the shock-absorber / bearing of a nave of a wheel with ears for fastening of connecting draft of the stabilizer of cross-section stability
2. 25 N of m, always replace 3. Connecting draft 4. Cross-section draft length of the modified cross-section drafts differs from length of drafts of old model 5. 45 N of m, always replace 6. Самоконтрящаяся a nut, always replace |
7. Stabilizer of cross-section stability 8. Cross-piece of a back suspension bracket the arm of fastening cross-section the draft / stabilizer of cross-section stability is modified 9. Rubber plug 10. 90 N of m. tighten, only when the car costs on the earth 11. Clip 12. 35 H.м. |