Audi 80/90/Coupe

since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburetors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Ignition system
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press coupling disk
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   + 8.3. Mechanical transmission 01А
   + 8.4. Automatic transmission 089
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Central air
+ 14. Electric equipment

8. Transmission

8.1. Coupling

8.1.1. Coupling pedal

GENERAL INFORMATION

Device of a pedal of coupling

1. Plug
check about wear, if necessary replace
get by means of a drift, establish by means of a vice
2. Returnable spring
3. Pedal arm
4. Returnable spring
remove / establish the tool 3117
5. Clip
6. Clip

7. Coupling pedal
8. 20 N of m.
9. Fork
10. Pin
11. Main cylinder of coupling
12. Hydraulic hose
13. Brake pedal
adjust pedal height before adjustment of a fork of the main cylinder of coupling
14. Clip

Grease all bearings and rubbing surfaces _{with MoS2 greasing}.

Prevention

If the pedal of coupling does not come back to a starting position properly even if the fork is adjusted correctly, the reason of it can be:

– air in hydrosystem;
– jamming of a returnable spring or pedal plug.

The additional carpet should not interfere with a course of a brake pedal.